Offer ends November 30.
6040 JFK Blvd E, Fairview, NJ
The old shower door has been scraping the curb. Replacing it sounds straightforward until you look at what has to come out first: glass, tracks, sealant, and hardware attached to tile for years.
For custom glass in Fairview, we want to see the existing setup first. A new enclosure should solve the old problem, not inherit it.
Fairview
Start with the reason you’re replacing the door. Is the glass damaged, the bottom leaking, or the frame difficult to clean? Those problems don’t all call for the same solution.
Boulevard East towers with building rules and booked elevator time.
Older walls and floors that need on-site measurement.
Full bathroom remodels where glass is the last step.
Mirrors and glass for shops, studios and restaurants.
Sometimes a replacement door can work within the existing layout. Other bathrooms benefit from a different arrangement. Hinged glass needs room to swing; sliding panels avoid that arc but introduce tracks and overlapping sections. A fixed panel has less hardware, though the entry width and splash area still need attention.
Then there’s removal. We need photos of the current enclosure, where its hinges meet the wall. Old holes, chipped tile, and uneven surfaces can change the plan. Ask specifically whether removal and disposal of the existing glass are included in your quotation. Don’t assume either is covered.
Main service
A single door on CRL hinges for walk-in showers and remodeled baths.
One or two fixed panels for an open shower with no door to swing.
A door that slides along the panel where there is no room to swing.
A door with side panels cut to fit niches, curbs and sloped ceilings.
A bathroom update may involve replacing the mirror as well as the shower glass. We fabricate custom mirrors in Fairview for vanities, alcoves, and larger wall areas. New dimensions must account for sconces, outlets, and damage behind the old mirror.
We make shower enclosures in Fairview with configurations suited to the opening, plus glass shelves, partitions, and interior doors.
If you’re replacing several pieces, send photos of all of them. We can coordinate finishes, with separate measurements and mounting checks.
Clear glass keeps the shower tile visible. Low-iron glass reduces the green cast that standard glass can show at exposed edges. Frosted glass gives more visual privacy, though it hides some of the tile you’ve chosen.
A brushed handle beside polished fixtures might bother you more than you expect. Compare finish samples against what’s staying in the room. And consider maintenance: a sliding system’s track and a frameless hinged door have different cleaning needs.
The right choice also depends on safe glass specifications and suitable hardware, not appearance alone.
Also for your home
Mirror walls, vanity mirrors and large shop mirrors, cut to size and installed level.
Stair, balcony and deck railings with an open view and solid CRL hardware.
Dividers that separate a room or an office and still let the light through.
Site measure
Recent work nearby
How it works
Tell us about the room and see glass and hardware options.
Laser measurement on site once the walls and tile are ready.
Layout, glass and finish with a clear written price.
You approve the drawing and the install date.
Our crew installs, checks the fit and cleans up.
You can browse our project gallery for shower layouts and custom mirror examples. It includes a master bathroom renovation at Riviera Towers in West New York and mirror work elsewhere in the region.
Use those photographs to explain a preference. That detail still needs checking against your opening.
Before custom glass installation in Fairview, we check the finished surfaces, wall alignment, and fixing locations. On a replacement job, we also need to understand what will be exposed when the old frame or mirror comes down.
Who’s arranging that removal? Is a contractor repairing the tile? Does the wall need time to dry or be refinished? Establish those responsibilities before selecting a measurement date.
If your property has delivery restrictions or requires insurance paperwork, tell us. We can review access without assuming every building follows the same rules.
Send wide photos of the existing enclosure or mirror, approximate dimensions, and what you want changed. Include close-ups of tracks, hinges, damaged areas, and nearby fixtures.
Replacement Project Inquiry Checklist
Request your Fairview estimate with those details. We’ll clarify the scope before putting a price to it.
We also serve these towns from the same office. See the New Jersey page for every area we cover.
FAQ
It depends on the quote. Confirm dismantling, disposal, and surface repairs. Ask for these items to be written into the scope.
Panel dimensions, glass choice, hardware, custom fabrication, access, and agreed removal work can affect pricing. Repairs to existing tile may be a separate cost.
Send the whole opening, both sides of the enclosure, hardware connections, and any damage. Add approximate width and height; we’ll confirm final dimensions on site.
After measurements and the replacement scope are agreed, we coordinate fabrication, any preparatory work, and installation around site readiness and applicable access requirements.
Send a few photos and rough dimensions and we will come back with options and a free estimate.